lr 3360, ls 3360, lo 3360, ly 3360, lg 3360, lp 3360 3 mm (t1) led, diffused 2002-03-14 1 fbesondere merkmale ? geh?usetyp: eingef ? rbtes, diffuses 3 mm (t1) geh ? use besonderheit des bauteils: l ? tspie ? e mit aufsetzebene wellenl ? nge: 645 nm (rot), 628 nm (super-rot), 606 nm (orange), 587 nm (gelb), 570 nm (gr n), 560 nm (pure green) abstrahlwinkel: 70 technologie: gaalp (rot, super-rot, orange, gelb, gr n), gap (pure green) optischer wirkungsgrad: 0,4 lm/w (rot), 1,5 lm/w (super-rot, orange, gelb), 2,5 lm/w (gr n), 0,6 lm/w (pure green) gruppierungsparameter: lichtst ? rke l ? tmethode: wellenl ? ten (ttw) verpackung: sch ttgut, gegurtet lieferbar anwendungen optischer indikator hinterleuchtung (lcd, handy, schalter, tasten, displays, werbebeleuchtung, allgemeinbeleuchtung) signal- und symbolleuchten markierungsbeleuchtung (z.b. stufen, fluchtwege, u. ? .) innenbeleuchtung im automobilbereich (z.b. instrumentenbeleuchtung, u. ? .) features package: colored, diffused 3 mm (t1) package feature of the device: solder leads with stand-off wavelength: 645 nm (red), 628 nm (super-red), 606 nm (orange), 587 nm (yellow), 570 nm (green), 560 nm (pure green) viewing angle: 70 technology: gaalp (red, super-red, orange, yellow, green), gap (pure green) optical efficiency: 0.4 lm/w (red), 1.5 lm/w (super-red, orange, yellow), 2.5 lm/w (green), 0.6 lm/w (pure green) grouping parameter: luminous intensity soldering methods: ttw soldering packing: bulk, available taped on reel applications optical indicators backlighting (lcd, cellular phones, switches, keys, displays, illuminated advertising, general lighting) signal and symbol luminaire marker lights (e.g. steps, exit ways, etc.) interior automotive lighting (e.g. dashboard backlighting, etc.)
2002-03-14 2 lr 3360, ls 3360, lo 3360, ly 3360, lg 3360, lp 3360 helligkeitswerte werden mit einer stromeinpr ? gedauer von 25 ms und einer genauigkeit von 11 % ermittelt. luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11 %. anm.: die standardlieferform von serientypen beinhaltet eine untere bzw. eine obere familiengruppe oder mindestens zwei einzelgruppen. in einer verpackungseinheit / gurt ist immer nur eine helligkeitsgruppe enthalten. die technologiebedingte helligkeits-streuung der heutigen led-herstellprozesse ber einen l?ngeren fertigungszeitraum (halbleitermaterial - chipherstellung - montageprozess) erlaubt keine zusage einer einzelnen helligkeitsgruppe. daher mssen mindestens zwei helligkeitsgruppen vorgesehen werden! note: the standard shipping format for serial types includes a lower or upper family group or at least two individual groups. no packing unit / tape ever contains more than one luminous intensity group. luminosity variations caused by the technology used in current led manufacturing processes over a protracted manufacturing period (semiconductor material - chip fabrication - assembly process) mean that it is not possible to assign leds to a single luminous intensity group. for this reason at least two luminous intensity groups must be provided! typ type emissions- farbe color of emission geh ? usefarbe color of package lichtst ? rke luminous intensity i f = 10 ma i v (mcd) lichtstrom luminous flux i f = 10 ma v (mlm) bestellnummer ordering code lr 3360-dg lr 3360-f lr 3360-g lr 3360-fj red red diffused 0.45 ? 2.8 1.12 ? 1.8 1.80 ? 2.8 1.12 ? 7.1 6 (typ.) 5 (typ.) 8 (typ.) 14 (typ.) q62703-q1316 q62703-q1317 q62703-q1318 q62703-q1319 ls 3360-hl ls 3360-k ls 3360-l ls 3360-kn super-red red diffused 2.80 ? 18.0 7.10 ? 11.2 11.20 ? 18.0 7.10 ? 45.0 26 (typ.) 20 (typ.) 35 (typ.) 65 (typ.) q62703-q1320 q62703-q1321 q62703-q1322 q62703-q1323 lo 3360-hl lo 3360-k lo 3360-l lo 3360-jm orange orange diffused 2.80 ? 18.0 7.10 ? 11.2 11.20 ? 18.0 4.50 ? 28.0 26 (typ.) 20 (typ.) 35 (typ.) 40 (typ.) q62703-q1887 q62703-q2400 q62703-q2596 q62703-q2410 ly 3360-hl ly 3360-k ly 3360-l ly 3360-kn yellow yellow diffused 2.80 ? 18.0 7.10 ? 11.2 11.20 ? 18.0 7.10 ? 45.0 26 (typ.) 20 (typ.) 35 (typ.) 65 (typ.) q62703-q1324 q62703-q1325 q62703-q1326 q62703-q1998 lg 3360-hl lg 3360-k lg 3360-l lg 3360-kn green green diffused 2.80 ? 18.0 7.10 ? 11.2 11.20 ? 18.0 7.10 ? 45.0 26 (typ.) 20 (typ.) 35 (typ.) 65 (typ.) q62703-q3818 q62703-q2008 q62703-q3507 q62703-q3819 lp 3360-gk lp 3360-h lp 3360-j lp 3360-hl pure green green diffused 1.80 ? 11.2 2.80 ? 4.5 4.50 ? 7.1 2.80 ? 18.0 16 (typ.) 9 (typ.) 14 (typ.) 26 (typ.) q62703-q2467 q62703-q2914 q62703-q2915 q62703-q3213
lr 3360, ls 3360, lo 3360, ly 3360, lg 3360, lp 3360 2002-03-14 3 grenzwerte maximum ratings bezeichnung parameter symbol symbol wert value einheit unit ls, lo, ly, lg lr lp betriebstemperatur operating temperature range t op ? 55 ? + 100 c lagertemperatur storage temperature range t stg ? 55 ? + 100 c sperrschichttemperatur junction temperature t j + 100 c durchlassstrom forward current i f 40 45 30 ma sto ? strom surge current t 10 s, d = 0.005 i fm 0.5 a sperrspannung reverse voltage v r 5v leistungsaufnahme power consumption t a = 25 c p tot 130 95 mw w ? rmewiderstand 1) thermal resistance sperrschicht/umgebung junction/ambient sperrschicht/l ? tpad junction/soldering point montage auf pc-board fr 4 (padgr ?? e 16 mm 2 ) mounted on pc board fr 4 (pad size 16 mm 2 ) minimale beinchenl ? nge mininum lead length r th ja r th js 400 180 k/w k/w 1) r th erh ? ht sich um 13 k/w pro mm beinchenl ? nge. each additional 1 mm of lead length increases r th by 13 k/w.
2002-03-14 4 lr 3360, ls 3360, lo 3360, ly 3360, lg 3360, lp 3360 kennwerte ( t a = 25 c) characteristics bezeichnung parameter symbol symbol wert value einheit unit lr ls lo ly lg lp wellenl ? nge des emittierten lichtes (typ.) wavelength at peak emission i f = 10 ma peak 660 635 610 586 572 557 nm dominantwellenl ? nge 1) (typ.) dominant wavelength i f = 10 ma dom 645 628 606 587 570 560 nm spektrale bandbreite bei 50 % i rel max (typ.) spectral bandwidth at 50 % i rel max i f = 10 ma ? 35 45 40 45 25 22 nm abstrahlwinkel bei 50 % i v (vollwinkel) (typ.) viewing angle at 50 % i v 2 ? 70 70 70 70 70 70 grad deg. durchlassspannung 2) (typ.) forward voltage (max.) i f = 10 ma v f v f 1.6 1.9 2.0 2.5 2.0 2.5 2.0 2.5 2.0 2.5 2.0 2.5 v v sperrstrom (typ.) reverse current (max.) v r = 5 v i r i r 0.01 10 0.01 10 0.01 10 0.01 10 0.01 10 0.01 10 a a temperaturkoeffizient von peak (typ.) temperature coefficient of peak i f = 10 ma; ? 10 c t 100 c tc peak 0.03 0.11 0.12 0.10 0.11 0.11 nm/k temperaturkoeffizient von dom (typ.) temperature coefficient of dom i f = 10 ma; ? 10 c t 100 c tc dom 0.06 0.07 0.07 0.07 0.07 0.05 nm/k temperaturkoeffizient von v f (typ.) temperature coefficient of v f i f = 10 ma; ? 10 c t 100 c tc v ? 1.4 ? 1.9 ? 1.9 ? 1.9 ? 1.4 ? 2.1 mv/k optischer wirkungsgrad (typ.) optical efficiency i f = 10 ma opt 0.4 1.5 1.5 1.5 2.5 0.6 lm/w 1) wellenl ? ngen werden mit einer stromeinpr ? gedauer von 25 ms und einer genauigkeit von 1 nm ermittelt. wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. 2) spannungswerte werden mit einer stromeinpr ? gedauer von 1 ms und einer genauigkeit von ?,1 v ermittelt. voltages are tested at a current pulse duration of 1 ms and a tolerance of ?.1 v.
lr 3360, ls 3360, lo 3360, ly 3360, lg 3360, lp 3360 2002-03-14 5 relative spektrale emission i rel = f ( ), t a = 25 c, i f = 10 ma relative spectral emission v( ) = spektrale augenempfindlichkeit standard eye response curve abstrahlcharakteristik i rel = f ( ? ) radiation characteristic ohl00982 v 100 400 450 500 550 600 650 700 nm pure-green green yellow orange super-red red 80 60 40 20 0 % i rel 0 0.2 0.4 1.0 0.8 0.6 ? 1.0 0.8 0.6 0.4 0? 10? 20? 40? 30? ohl01165 50? 60? 70? 80? 90? 100? 0 20? 40? 60? 80? 100? 120?
lr 3360, ls 3360, lo 3360, ly 3360, lg 3360, lp 3360 2002-03-14 6 durchlassstrom i f = f ( v f ) forward current t a = 25 c maximal zul ? ssiger durchlassstrom i f = f ( t ) max. permissible forward current ls, lo, ly, lg relative lichtst ? rke i v / i v(10 ma) = f ( i f ) relative luminous intensity t a = 25 c maximal zul ? ssiger durchlassstrom i f = f ( t ) max. permissible forward current lr ohl02237 super-red orange/yellow green red pure-green f 10 5 -1 10 0 5 10 1 ma 10 2 1.0 1.8 1.4 2.2 v 2.6 3.0 3.4 f v 0 ohl00538 f ? c t 0 20 40 60 80 100 ma 10 20 30 40 50 temp. solder point temp. ambient t a t s t s a t v v (10 ma) 10 -1 0 10 10 12 10 ma red yellow green super-red orange pure-green 10 -3 5 ohl02146 f 5 -2 10 5 -1 10 0 10 1 10 55 0 ohl00983 f ? c t 0 20 40 60 80 100 s a s temp. solder point temp. ambient a 10 20 30 40 ma 50
lr 3360, ls 3360, lo 3360, ly 3360, lg 3360, lp 3360 2002-03-14 7 maximal zul ? ssiger durchlassstrom i f = f ( t ) max. permissible forward current lp zul ? ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 25 c ls, lo, ly, lg, lr relative lichtst ? rke i v / i v(25 c) = f ( t a ) relative luminous intensity i f = 10 ma zul ? ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 25 c lp 0 ohl00984 i f ? c t 0 20 40 60 80 100 10 20 30 40 ma temp. solder point temp. ambient t a t s t s a t ohl01162 s 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 t d i t t p f t p = d = 0.005 0.01 0.02 0.05 0.1 0.2 0.5 dc 10 1 5 i f t 2 10 3 10 4 10 5 ma p ohl02236 0 0.8 1.2 0.4 1.6 2.0 yellow green orange super-red pure-green 0406080 ? c 100 20 red a t v i v (25 ? c) i ohl01686 s 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 t d i t t p f t p = d = 0.005 0.01 0.02 0.05 0.2 0.5 dc 10 1 5 i f t 2 10 0.1 p 10 3 ma
2002-03-14 8 lr 3360, ls 3360, lo 3360, ly 3360, lg 3360, lp 3360 ma ? zeichnung package outlines ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). kathodenkennung: k ? rzerer l ? tspie cathode mark: short solder lead gewicht / approx. weight: 0.15 g 0.4 (0.016) 0.6 (0.024) 3.1 (0.122) 3.4 (0.134) area not flat 5.7 (0.224) 6.1 (0.240) 2.7 (0.106) 2.9 (0.114) 4.8 (0.189) 4.4 (0.173) 3.7 (0.146) 3.5 (0.138) 27.0 (1.063) 29.0 (1.142) 0.8 (0.031) 0.4 (0.016) 0.4 (0.016) 0.7 (0.028) 1.2 (0.047) 1.8 (0.071) gexy6045 0.9 (0.035) 1.1 (0.043) cathode spacing 2.54 (0.100) 0.6 (0.024) 0.4 (0.016)
lr 3360, ls 3360, lo 3360, ly 3360, lg 3360, lp 3360 2002-03-14 9 l ? tbedingungen soldering conditions wellenl ? ten (ttw) (nach cecc 00802) ttw soldering (acc. to cecc 00802) empfohlenes l ? tpaddesign wellenl ? ten (ttw) recommended solder pad ttw soldering ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). ohly0598 0 0 50 100 150 200 250 50 100 150 200 250 300 t t c s 235 c 10 s c ... 260 1. welle 1. wave 2. welle 2. wave 5 k/s 2 k/s ca 200 k/s cc ... 130 100 2 k/s zwangsk ? hlung forced cooling normalkurve standard curve grenzkurven limit curves 4 (0.157) ohlpy985 4.8 (1.890)
2002-03-14 10 lr 3360, ls 3360, lo 3360, ly 3360, lg 3360, lp 3360 published by osram opto semiconductors gmbh & co. ohg wernerwerkstrasse 2, d-93049 regensburg ? all rights reserved. attention please! the information describes the type of component and shall not be considered as assured characteristics. terms of delivery and rights to change design reserved. due to technical requirements components may contain dangerous substances. for information on the types in question please contact our sales organization. if printed or downloaded, please find the latest version in the internet. packing please use the recycling operators known to you. we can also help you get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. you must bear the costs of transport. for packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. components used in life-support devices or systems must be expressly authorized for such purpose! critical components 1 may only be used in life-support devices or systems 2 with the express written approval of osram os. 1 a critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. if they fail, it is reasonable to assume that the health of the user may be endangered. revision history: 2002-03-14 previous version: 2001-03-12 page subjects (major changes since last revision) 3 thermal resistance (footnote) 4 dominant wavelength (orange)
|
